HAWA VARIOTEC 150H Sliding Door System with Guide for 1 Door

Product №: WEBKIT1243953

Required products

Description

Simple adjustment

The HAWA VARIOTEC 150H Sliding Door System with Guide includes all the components for 1 sliding wood door intended for use within a multi-door sliding partition system with a bottom guide channel. This is a top-hung sliding mechanism with ball bearing wheels with a door weight capacity of up to 150 kg (330 lbs). Suspension profiles are rebated/mortised into the door to conceal hardware and allow for door adjustments. H-shape suspension profiles work with press-fit brush seals to close gaps at the top and bottom of the door.

ADVANTAGES AND BENEFITS

Pre-packed modular set for one sliding door.

INCLUDED IN THIS WEBKIT
Shoe with Guide Piece Product № 8913781D10	Bag
2-Wheeled Carriage Product № 89138182G	Box
Brush Seal for Suspension Profile Product № 891379190	Per unit
Hex Wrench, 5 mm (7/32") Product № 89171102G	Per unit
Multipurpose Suspension Profile Product № 65914232H	Length
Cover for Suspension Profile Product № 891421190	Per unit
Fork Spanner Product № 89154592G	Per unit

REQUIRED PRODUCTS

Requires the following products
HAWA VARIOTEC 150H Multi-Door Sliding Partition System Product № WEBKIT1243957 Number of Doors: 7 Door Width: 997 to 1 000 mm Door Configurations: Perpendicular (90 degree) to upper track Overall Length: 7 010 mm	Per unit
AND
HAWA VARIOTEC 150H Multi-Door Sliding Partition System Product № WEBKIT1243956 Number of Doors: 6 Door Width: 1 045 to 1 148 mm Door Configurations: Parallel to upper track Overall Length: 6 400 mm	Per unit

TECHNICAL SPECIFICATIONS

Product №

WEBKIT1243953

Roller Position

Upper

Door Installation

Top Hung

Adjustable

Yes

Weight Capacity per Door

60 to 150 kg

Number of Doors

Door Height

1 800 to 4 000 mm

Door Width

600 to 1 500 mm

Door Thickness

35 to 60 mm

Track Mounting

Ceiling Mount

Soft-Closing

Door Movement

Movable Wall

Brand

Variotec

IMPORTANT INFORMATION

IMPORTANT: Measure in millimeters (mm) for best accuracy during assembly and installation.
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. Doing so will cause early wear and performance failure.

DISCLAIMER

Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.