Instructions
RO 30 Sliding Door Systems
Product # WEBKIT1242898
For recessed and surface mount tracks
The RO 30 Sliding Door Systems are designed for single sliding, bypassing, and biparting sliding wood cabinet doors weighing up to 33 lb (15 kg) each. Select from two different types of hardware sets: one for inset applications with recessed track, and the other for full overlay applications for surface mount tracks mounted to the front edge of the cabinet top and base.
Features:
- For wood doors 5/8 in (15 mm) to 3/4 in (20 mm) thick
- For inset applications select type RM 026 recessed upper and lower track
- For overlay applications select RM 009 + RM 010 surface mount track set
- Simple and flexible direct mount hardware installation
IMPORTANT: For optimal performance, make sure the dimensions of the door are balanced. It is suggested to build the door height 3 times or less than the width of the door (max. 1:3 ratio).
Ideal for residential and commercial applications for small to medium size cabinet doors for storage units, office furniture, bookshelves, and entertainment units.
Features:
- For wood doors 5/8 in (15 mm) to 3/4 in (20 mm) thick
- For inset applications select type RM 026 recessed upper and lower track
- For overlay applications select RM 009 + RM 010 surface mount track set
- Simple and flexible direct mount hardware installation
IMPORTANT: For optimal performance, make sure the dimensions of the door are balanced. It is suggested to build the door height 3 times or less than the width of the door (max. 1:3 ratio).
Ideal for residential and commercial applications for small to medium size cabinet doors for storage units, office furniture, bookshelves, and entertainment units.
| Product # | Detailed Door Movement | Track Mounting | Door Position | Number of Doors | Overall Length | Door Width |
|---|---|---|---|---|---|---|
| WEBKIT1242898 | Biparting | In Front of the Cabinet | Full Overlay | 2 | Max. 9 ft 10 in* | 12 to 29 5/8 in* |
| WEBKIT1242894 | Bypassing | Recessed - Inside the Cabinet | Inset/Inlay | 2 | Max. 39 3/8 in* | 12 to 18 in* |
| WEBKIT1242895 | Bypassing | Recessed - Inside the Cabinet | Inset/Inlay | 2 | Max. 78 3/4 in* | 12 to 36 in* |
| WEBKIT1242896 | Bypassing | Recessed - Inside the Cabinet | Inset/Inlay | 3 | Max. 9 ft 10 in* | 12 to 36 in* |
| WEBKIT1242897 | Single sliding | In Front of the Cabinet | Full Overlay | 1 | Max. 78 3/4 in* | 12 to 36 in* |
ADVANTAGES AND BENEFITS
- For inset and overlay applications
- For wood doors 5/8 in (15 mm) to 3/4 in (20 mm) thick
- Two types of tracks: recessed and surface mount
- Simple and flexible direct mount installation
- For wood doors 5/8 in (15 mm) to 3/4 in (20 mm) thick
- Two types of tracks: recessed and surface mount
- Simple and flexible direct mount installation
INCLUDED IN THIS WEBKIT
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1242898
Door Material
Wood
Door Movement
Straight Sliding
Load Capacity
33.1 lb*
Door Thickness
19/32 to 25/32 in*
Application
Furniture, Cabinet, Storage
Door Height
12 to 59 in*
Finish
Silver
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
IMPORTANT: For optimal performance, make sure the dimensions of the door are balanced. It is suggested to build the door height 3 times or less than the width of the door (max. 1:3 ratio). For inset applications with recessed track, cut a groove into the top and bottom of the cabinet as per the instructions 5/16 in (8 mm) x 5/16 in (8 mm) to install the track.
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
IMPORTANT:
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
IMPORTANT:
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
