Line art
SEQUANZIATO RO 82 Multiple Sliding Door Series
Product №: WEBKIT1245289
| Product № | Weight Capacity per Door | Number of Doors | Door Width | Soft-Closing | Overall Length | Door Installation |
|---|---|---|---|---|---|---|
| WEBKIT1245289 | 33.1 to 220 lb* | 2 | 23 5/8 to 29 7/8 in* | No | 78 3/4 in* | Right hand to left open |
| WEBKIT1245294 | 33.1 to 88.2 lb* | 3 | 25 5/8 to 45 1/4 in* | Yes | 13 ft 1 in* | Left hand to right open |
| WEBKIT1245293 | 33.1 to 88.2 lb* | 3 | 25 5/8 to 45 1/4 in* | Yes | 13 ft 1 in* | Right hand to left open |
| WEBKIT1245291 | 33.1 to 220 lb* | 2 | 23 5/8 to 29 7/8 in* | No | 78 3/4 in* | Left hand to right open |
| WEBKIT1245292 | 33.1 to 220 lb* | 3 | 23 5/8 to 43 1/4 in* | No | 9 ft 10 in* | Left hand to right open |
| WEBKIT1245290 | 33.1 to 220 lb* | 3 | 23 5/8 to 43 1/4 in* | No | 9 ft 10 in* | Right hand to left open |
Description
Without floor track
The SEQUANZIATO RO 82 is for sliding multiple wood doors without a bottom floor channel. A simple to install quality hardware for two or three doors 35 mm (1-3/8 in) thick.
A clip-on spacer profile links standard single tracks together to make double or triple tracks and ensure accuracy. Clip-on fascia can be applied front or back for a nice finish. Flexible and direct mount installation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove at the bottom of the door 21 x 18 mm (7/8 x 3/4 in) for twin guide rail.
Ideal solution for residential and commercial applications for closets, room dividers, meeting rooms, restaurants, and other applications for multiple sliding doors.
INCLUDED IN THIS WEBKIT |
|
|---|---|
|
Set
|
|
Per unit
|
|
Per unit
|
|
Per unit
|
|
Set
|
|
Per unit
|
TECHNICAL SPECIFICATIONS
Product №
WEBKIT1245289
Door Material
Wood
Door Movement
Movable Wall
Detailed Door Movement
Bypassing, Telescoping
Track Mounting
Ceiling Mount
Compatible with
RO 82
Door Thickness
1 3/8 to 1 9/16 in*
Door Height
47 1/4 to 118 in*
Stopper
Two
Roller Type
Ball Bearing
Roller Position
Upper
Track Material
Anodized Aluminum
Track type
Box Track
Groove Width at the Bottom of Door
23/32 in*
Groove Needed for Guiding System
Yes
Milling Depth
13/16 in*
Bottom Guide
Yes
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Running and Guiding Tracks for Sliding Door Systems
- Recessed and Flush Cup Pulls for Sliding Doors
- Door Guides for Sliding Door Systems
- Mortice Locks, Latches and Striker Plates for Sliding Doors
- Sliding Solutions for Architectural Applications
- Hardware Sets
- Door Flush Bolts
- Panolite(TM) - Lightweight and ecological panels
DISCLAIMER
Please make sure to read the entirety of the installation manual before proceeding with the installation. #8 screws and appropriate anchors required for installation (not included). A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure and void the warranty.
- Pictures are provided for visual reference only: the actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. The manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
