DN 50 CF Top Hung Sliding System with Central Drive Technology

To buy, choose from the options below.
Track Mounting: Ceiling Mount Wall Mount Number of Doors: 1 Detailed Door Operation: Single Sliding Select Options
Product number Track Mounting Number of Doors Detailed Door Operation
WEBKIT1010792 Ceiling Mount 1 Single Sliding
WEBKIT1010793 Wall Mount 1 Single Sliding
WEBKIT1010794 Ceiling Mount 2 Bypassing


Extremely quiet movement due to the central drive technology

The DN 50 CF Top Hung Sliding system is for wood doors weighing up to 50 kg (110 lbs) each. The Central Drive Technology balances and stabilizes the upper wheels for a smooth and quiet performance. The upper U45 track can be ceiling mounted and wall mounted with a continuous L-bracket. Internal track stoppers with retaining device reduce bounce back when the door is stopped. A Clip on fascia is available to cover the upper track and gap between the track and the top of the door for a clean elegant result.


Requires ONE of the following products

Length of 12 linear foot
Length of 2 linear meter
Length of 3 linear meter


Door Operation
Straight Sliding
Door Material
Weight Capacity per Door
Max. 110 lb*
Door Height
96 in*
Roller Type
Central Drive Ball Bearing
Roller Position
Door Thickness
23/32 to 1 25/32 in*
Door Width
63 in*
Track Length
78 3/4 to 118 in*
Track Material
Anodized Aluminum
Track Finish
Satin Aluminum

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Height adjustable.

With our new central drive technology, the ball bearings are encased in the body of the carrier, transmitting balanced movement to the wheels and ensuring a long life. This also offers protection against dust, grime, and other external agents that could affect the overall function of the carrier.


- Pocket doors.
- Room divisions.
- Access to walk-in closets.


Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes and modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At all times, execution and installation must be performed by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.


The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
DN 50 CF Top Hung Sliding System with Central Drive Technology

To buy, choose from the options.