Top Sliding System for Standard Inlay Installation. DN 80VD
Easy installation: doesn't require you to bore glass.
This top sliding system is designed for glass doors 8 to 10 mm and 12 to 13 mm. The trolley is anchored to compression clamps. A retention device holds the door in position. The compression clamp holds the glass without the need to bore it.
|Product number||Track Mounting||Function||Number of Doors||Door Position||Rail Length||Displayed in These Showrooms|
|Wall Front Using Brackets||Standard Sliding||1||In Front of Wall||78 3/4 to 144 in*|
|On Ceiling Surface||Standard Sliding||1||In Front of Wall||78 3/4 to 144 in*||Toronto|
|On Ceiling Surface||Standard Sliding||1||Inside Frame||78 3/4 to 144 in*|
|On Ceiling Surface||By-passing||2||Inside Frame||12 ft|
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
Requires ONE of the following products
|Type of Door||Glass|
|Weight Capacity per Door||Max. 176 lb*|
|Door Mounting Method||Compression Clamp|
|Roller Type||Premium Ball Bearing|
|Door Thickness||5/16 to 1/2 in*|
|Door Width||27 1/2 to 59 in*|
|Rail Material||Anodized Aluminum|
|Rail Finish||Satin Aluminum|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Sliding Door Finishing Parts
- Sliding Door Profiles
Zamac Clamp End Cap KitProduct number 8910300001462Bag of 4 units
Aluminum Fascia TrackProduct number 89041DNVD1210Length of 2 linear meter
U21 66 Aluminum Snap-on FasciaProduct number 89041U2166210Length: 78 3/4 in*Length of 2 linear meter
U21 66 Aluminum Snap-on FasciaProduct number 89041U2166310Length: 9 ft 10 in*Length of 3 linear meter
- Compression clamps require no drilling of glass.
- The fascia (optional) gives an elegant and uniform finishing.
- Can be installed overlay using the lateral bracket (optional).
Glass doors, barn doors, room divisions, pocket doors.
Use of safety glass is recommended.
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier's hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Always make sure to install the product carefully using the appropriate fixation for your material.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Never use any spray lubricant on these products.
Use a dry cloth to remove fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the hangers.