Made and polished by hand

The Spider system represents retro design at its best. In terms of form, function and manufacturing complexity, this product is the top of the line. All pieces of this unique system are manually milled from solid stainless steel and extensively polished or ground by hand. Can be universally employed for doors made of wood or any other material.
Matching running rail fixtures are available for wall mounting.

Product number



Requires the following products

Per unit

Requires ONE of the following products

Stainless Steel Track Product no. 892000252170
  • Rail Length: 78 3/4 in*
  • Number of Wall Fixations Needed: 4
Length of 2 linear meter
Stainless Steel Track Product no. 892000253170
  • Rail Length: 9 ft 10 in*
  • Number of Wall Fixations Needed: 6
Length of 3 linear meter


Product number 891033170
Type of Door Wood
Door Thickness 1 9/16 in*
Weight Capacity per Door Max. 452 lb
Door Position In Front of Wall
Rail Type 25 mm Rod
Track Mounting Wall Front Using Brackets
Door Mounting Method Drill
Roller Position Upper
Number of Doors 1
Roller Type Premium Ball Bearing
Rail Length 78 3/4 to 118 in*
Design Intent Closet & Walk-In Closet, Screen Panel
Groove Needed for Guiding System Yes
Groove Depth 1/2 in*
Rail Material Stainless Steel
Rail Finish Stainless Steel
Milling 5/8 in*
Operation Single Sliding

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


- With three glass fasteners, Spider can easily carry heavy door leaves while ensuring precise adjustability and optimal stability.


- Screws
- Bumper stop
- Single roller carrier
- Floor guide


Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.


The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.

Product number: 891033170