Nero - Panel
Harmony panels are a high-quality product that provides a strong visual impact and stylish results. These panels are available in a wide range of colors with exactly the same hue, whether in an ultra-gloss or super-matte finish.
The exterior sides are covered with an 1.4 mm acrylic sheet and the 16 mm core panel is in "carb2" particle.
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
|Panel Core||Particle CARB II|
|Product Specialization||Vertical Interior Surface, Furniture Making, Cabinetry|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Highly abrasion, water, and stain resistant.
- Resistant to UV rays and discoloration.
- Easy to clean.
- Extremely resistant lacquered mirror effect.
- May be repolished.
- Leaves no visible fingerprints behind.
- Ultra-opaque surface.
- Chemical and stain resistant.
The matching 1.4 mm sheets can be used for store, living room, kitchen or bathroom furnishings, thus providing tremendous flexibility.
For normal cleaning, all glossy parts should be wiped with a soft cloth dampened with water or a "NEUTRAL" de-greasing liquid, or an anti-static product.
Do not use: acetone, trichloroethylene (TCE), ammonia or steel scouring pads or abrasive creams that could scratch the surface.
Only remove the protective film once the product has been fully installed or processed, taking care not to allow any fingernails or sharp and abrasive objects to come into contact with the surface until cured. See curing instructions below.
As soon as the protective film has been removed the product is still very sensitive to scratching. To harden and improve resistance, the surface should be wiped with a soft cloth and an antistatic product (e.g. "Pledge multi-surface antistactic spray" or an equivalent). Allow the product to settle for at least 24 HOURS.
Nero - Panel
To buy, select a product number or choose an option for Finish option.